• 发布时间: 2019 - 10 - 16
    LOTMAXX, an open and creative 3D printer brand, currently has launched its first product LOTMAXX SC-10 to the market and several independent 3D printer reviewers have been released some review videos on Youtube for it.Most of technology companies name their product lines and/or products for some dedicated purpose, but what is the purpose for LOTMAXX to name its first product line with SC?According to its official website lotmaxx.com, it says “LOTMAXX is inspired by three giants’ names and stories in the 3D printing industry. They are Chuck Hull, the inventor of 3D printing technology and now he is the co-founder, executive vice president and chief technology officer of 3D Systems; Scott Crump, the inventor of FDM 3D printing technology and now he is the co-founder of Stratasys, Ltd.; and L...
  • 发布时间: 2019 - 10 - 16
    As we all may know, it takes a relatively long time to design and print a 3D model on a 3D printer. And all of us hope that the process of printing is smooth and effective, but sometimes the external reason like power loss may interrupt our 3D printing. And we have to waste the printed model and re-print it again. Is there possible for us to resume a print after power loss without wasting our models? The answer is YES, and here are some tips we want to share with you.How can we resume printing after power loss?There may be a power loss during the printing process, it will happen to us for various reasons. Manually pausing and resuming printing process are feasible as usual, but what can we do if we need to have an extended pause or resume a print after power loss? One way to solv...
  • 发布时间: 2019 - 09 - 18
    Most 3D printing practitioners have had a printing experience like this, actually we know the heartbreak of coming in to check on an 8-hour print but only to find that in hour 7 we ran out of filament (or the filament broke) and our printer has been dutifully moving around for no reason. If there is no better solution, we have to pause the print manually before the filament runs out and change the filament or else it will just keep printing blank. How can we avoid running out of filament in the process of printing?The best way to solve this problem is to add a filament sensor and/or detector to our 3D printer or to choose a 3D printer with a filament detector such as lotmaxx sc-10.Lotmaxx sc-10’s filament break detection and filament runout alarm warn us of the absence of filament in ...
  • 发布时间: 2019 - 09 - 02
    Most of 3D printer users have experienced the following scenario. After we spend hours to design our favorite 3D model and input it to our 3D printer to print, we cannot focus on our creation or take a good rest or even have to suffer from endless complaints from our neighbors because of the noise coming out from our 3D printing.The cause is that our 3D printer does not have its mute driver module. The only solution to this issue is to choose a 3D printer with a mute driver module or to stop printing anything, obviously, the latter is not our option. Lotmaxx SC-10 can help us solve this issue easily with its mute driver module.Mute PrintingWith Mute Driver Module, Lotmaxx SC-10 provides Mute Printing Model to let us print our models at any time without making any noise. No need to worry ab...
  • 发布时间: 2019 - 12 - 06
    Achieving an outstanding quality in FDM 3D printing is not as easy as one could expect. A lot depends not only on the 3D model you’re trying to manufacture, but also from various settings and environmental factors related to the machine itself, its properties and technical condition.We gathered a set of tips and pieces of advice based on our experience with 3D printing in general and using ZMorph multitool 3D printer in particular. We hope they’ll help you in achieving the best possible quality of your prints.Take good care of your filamentsThis first one may sound like a no-brainer, but a lot of people forget about taking proper care of their filaments, which can influence the entire 3D printing process. It’s very important to make sure that the filament is properly wound onto t...
  • 发布时间: 2019 - 11 - 08
    Amazon has opened up a new store that lets customers customize 3D products online.3D printing is a slowly spreading technology. However, its expensive equipment and complicated design software still make it difficult for the everyday buyer to get into.Amazon has been trying to simplify the process. Earlier this year, the online retailer got into the 3D printing game by providing templates for items to make on 3D printers. However, other companies already had that market covered, including Ebay, 3DSystems and MakerBot. Today, Amazon announced that it has teamed up with 3D printing service companies Sculpteo, Mixee Labs and 3DLT to fulfill the custom orders as they come in. The store will allow customers to print 'more than 200 unique print on-demand products.' Amazon said it ex...
  • 发布时间: 2019 - 10 - 30
    Ollie is a self-driving car, powered by IBM's Watson, that was created by 3D printing and is now loose in Washington, D.C.Ollie, created by Local Motors, could be the future of commuting. This driverless vehicle comes equipped with IBM's Watson supercomputer and recently debuted at the National Harbor in Washington, D.C.Here's the catch (if a driverless vehicle run by a supercomputer wasn't enough of a catch for you): Ollie was 3D printed from crowd-sourced plans. Would you feel safe riding in such a bus?An electric vehicle, Ollie seats up to 12 people, making it perfect for public transportation. Local Motors claims this boxy short bus could function as a taxi, shuttle or a series of 'interconnected pods.' But Ollie isn't limited to those use cases. Would ...
  • 发布时间: 2019 - 10 - 11
    Aleph Farms partnered with 3D Bioprinting Solutions to 3D print a steak in the International Space Station.The race to find a viable alternative for cow-based meat is heating up. The latest stunt is by Aleph Farms, which is 3D bioprinting a steak on the International Space Station (ISS).Previously, synthetic meat has been limited to plant-based solutions and a limited number of lab-grown burgers, but the ability to reproduce the full texture of a good steak has been tantalizingly out of reach.In late 2018, Israeli startup Aleph Farms released their first-ever 3D printed meat, in the form of “minute steaks”. These thin pieces of beef, produced in a lab on Earth, reportedly had the same texture as meat cut from a cow. Taking just 3 weeks to produce, the aim was not only to produce beef,...
  • 发布时间: 2019 - 09 - 17
    3D printing offers tons of benefits in the fields of medicine, engineering and business. This page will help you understand and appreciate the different 3D printing applications.What to make with a 3d printer? What can you print with a 3d printer? Have you asked yourself these questions?If you are really wondering what this technology can deliver, then this page is for you. We will give you an idea what to print with a 3D printer.3D printing capabilities and 3D printer uses are unlimited. It is used in the packaging industry, automotive industry, aircraft and health care. To better understand the power of 3D printing, here’s a list of the benefits of 3D printing.#1 More AffordableThe traditional ways of prototyping injection mold tools and production runs are ...
  • 发布时间: 2019 - 10 - 16
    LOTMAXX, an open and creative 3D printer brand, currently has launched its first product LOTMAXX SC-10 to the market and several independent 3D printer reviewers have been released some review videos on Youtube for it.Most of technology companies name their product lines and/or products for some dedicated purpose, but what is the purpose for LOTMAXX to name its first product line with SC?According to its official website lotmaxx.com, it says “LOTMAXX is inspired by three giants’ names and stories in the 3D printing industry. They are Chuck Hull, the inventor of 3D printing technology and now he is the co-founder, executive vice president and chief technology officer of 3D Systems; Scott Crump, the inventor of FDM 3D printing technology and now he is the co-founder of Stratasys, Ltd.; and L...
  • 发布时间: 2019 - 09 - 18
    Most 3D printing practitioners have had a printing experience like this, actually we know the heartbreak of coming in to check on an 8-hour print but only to find that in hour 7 we ran out of filament (or the filament broke) and our printer has been dutifully moving around for no reason. If there is no better solution, we have to pause the print manually before the filament runs out and change the filament or else it will just keep printing blank. How can we avoid running out of filament in the process of printing?The best way to solve this problem is to add a filament sensor and/or detector to our 3D printer or to choose a 3D printer with a filament detector such as lotmaxx sc-10.Lotmaxx sc-10’s filament break detection and filament runout alarm warn us of the absence of filament in ...
  • 发布时间: 2019 - 09 - 02
    Most of 3D printer users have experienced the following scenario. After we spend hours to design our favorite 3D model and input it to our 3D printer to print, we cannot focus on our creation or take a good rest or even have to suffer from endless complaints from our neighbors because of the noise coming out from our 3D printing.The cause is that our 3D printer does not have its mute driver module. The only solution to this issue is to choose a 3D printer with a mute driver module or to stop printing anything, obviously, the latter is not our option. Lotmaxx SC-10 can help us solve this issue easily with its mute driver module.Mute PrintingWith Mute Driver Module, Lotmaxx SC-10 provides Mute Printing Model to let us print our models at any time without making any noise. No need to worry ab...
  • Technical SpecificationsMolding TechnologyNozzle DiameterNumber of NozzleNozzle TemperatureTemperature of Heated-bedFDM0.4mm(±0.1mm)1260°100°Product SupportModel SupportFormat SupportSlicer SoftwareParameters of Power Supply Printer PowerFilament SupportFilament DiameterDisplay ScreenOnline or TF Offline PrintSTL, OBJ, AMFCura, Repetier-host, Simplify3d100-120v~6.8a/200-240v~3.4a 50hz/60hz290wPLA, ABS, TPU, Wood PLA, Copper, Gradient and etc.1.75mm3.5 inch LCD Touch ScreenPrinting SpecificationsPrinting VolumePrinting SpeedPrinting Accuracy Layer Thickness235*235*280mmUp to 180 mm/s with normal printing speed  ranging from 30 mm/s±0.1mm0.1-0.4mm
  • Technical SpecificationsMolding TechnologyNozzle DiameterNumber of NozzleNozzle TemperatureTemperature of Heated-bedFDM0.4mm(±0.1mm)1260°100°Product SupportModel SupportFormat SupportSlicer SoftwareParameters of Power Supply Printer PowerFilament SupportFilament DiameterDisplay ScreenOnline or TF Offline PrintSTL, OBJ, AMFCura, Repetier-host, Simplify3d100-120v~6.8a/200-240v~3.4a 50hz/60hz290wPLA, ABS, TPU, Wood PLA, Copper, Gradient and etc.1.75mm3.5 inch LCD Touch ScreenPrinting SpecificationsPrinting VolumePrinting SpeedPrinting Accuracy Layer Thickness235*235*280mmUp to 180 mm/s with normal printing speed  ranging from 30 mm/s±0.1mm0.1-0.4mm
  • Technical SpecificationsMolding TechnologyNozzle DiameterNumber of NozzleNozzle TemperatureTemperature of Heated-bedFDM0.4mm(±0.1mm)1260°100°Product SupportModel SupportFormat SupportSlicer SoftwareParameters of Power  Printer PowerFilament SupportFilament DiameterDisplay ScreenOnline or TF Offline PrintSTL, OBJ, AMFCura, Repetier-host, Simplify3dSupply: 100-240 5.9A 50/60Hz   Output: DC 24V 21A480wPLA, ABS, TPU, Wood PLA, Copper, Gradient and etc.1.75mm4.3 inch LCD Touch ScreenPrinting SpecificationsPrinting VolumePrinting SpeedPrinting Accuracy Layer Thickness320*320*420mmUp to 180 mm/s with normal printing speed  ranging from 30 mm/s±0.1mm0.1-0.4mm
  • 桌面级专业3d打印机

  • Technical SpecificationsMolding TechnologyNozzle DiameterNumber of NozzleNozzle TemperatureTemperature of Heated-bedFDM0.4mm(±0.1mm)1260°100°Product SupportModel SupportFormat SupportSlicer SoftwareParameters of Power Supply Printer PowerFilament SupportFilament DiameterDisplay ScreenOnline or TF Offline PrintSTL, OBJ, AMFCura, Repetier-host, Simplify3d100-120v~6.8a/200-240v~3.4a 50hz/60hz290wPLA, ABS, TPU, Wood PLA, Copper, Gradient and etc.1.75mm3.5 inch LCD Touch ScreenPrinting SpecificationsPrinting VolumePrinting SpeedPrinting Accuracy Layer Thickness235*235*280mmUp to 180 mm/s with normal printing speed  ranging from 30 mm/s±0.1mm0.1-0.4mm
  • Technical SpecificationsMolding TechnologyNozzle DiameterNumber of NozzleNozzle TemperatureTemperature of Heated-bedFDM0.4mm(±0.1mm)1260°100°Product SupportModel SupportFormat SupportSlicer SoftwareParameters of Power Supply Printer PowerFilament SupportFilament DiameterDisplay ScreenOnline or TF Offline PrintSTL, OBJ, AMFCura, Repetier-host, Simplify3d100-120v~6.8a/200-240v~3.4a 50hz/60hz290wPLA, ABS, TPU, Wood PLA, Copper, Gradient and etc.1.75mm3.5 inch LCD Touch ScreenPrinting SpecificationsPrinting VolumePrinting SpeedPrinting Accuracy Layer Thickness235*235*280mmUp to 180 mm/s with normal printing speed  ranging from 30 mm/s±0.1mm0.1-0.4mm
  • Technical SpecificationsMolding TechnologyNozzle DiameterNumber of NozzleNozzle TemperatureTemperature of Heated-bedFDM0.4mm(±0.1mm)1260°100°Product SupportModel SupportFormat SupportSlicer SoftwareParameters of Power  Printer PowerFilament SupportFilament DiameterDisplay ScreenOnline or TF Offline PrintSTL, OBJ, AMFCura, Repetier-host, Simplify3dSupply: 100-240 5.9A 50/60Hz   Output: DC 24V 21A480wPLA, ABS, TPU, Wood PLA, Copper, Gradient and etc.1.75mm4.3 inch LCD Touch ScreenPrinting SpecificationsPrinting VolumePrinting SpeedPrinting Accuracy Layer Thickness320*320*420mmUp to 180 mm/s with normal printing speed  ranging from 30 mm/s±0.1mm0.1-0.4mm
  • 桌面级专业3d打印机

  • Technical SpecificationsMolding TechnologyNozzle DiameterNumber of NozzleNozzle TemperatureTemperature of Heated-bedFDM0.4mm(±0.1mm)1260°100°Product SupportModel SupportFormat SupportSlicer SoftwareParameters of Power Supply Printer PowerFilament SupportFilament DiameterDisplay ScreenOnline or TF Offline PrintSTL, OBJ, AMFCura, Repetier-host, Simplify3d100-120v~6.8a/200-240v~3.4a 50hz/60hz290wPLA, ABS, TPU, Wood PLA, Copper, Gradient and etc.1.75mm3.5 inch LCD Touch ScreenPrinting SpecificationsPrinting VolumePrinting SpeedPrinting Accuracy Layer Thickness235*235*280mmUp to 180 mm/s with normal printing speed  ranging from 30 mm/s±0.1mm0.1-0.4mm
  • Technical SpecificationsMolding TechnologyNominal VoltageOutput Voltage Printing speed Accuracy of Z-axisNet WeightPrinting VolumePrinter's VolumeLCD100-240v 50hz/60hz 12v20mm/h0.000625mm7.75kg120mm*68mm*155mm220mm*220mm*410mmSlicer SoftwareRated PowerFilament SupportLight SourceDisplay ScreenWay of Print                                                                                                                           ChiTuBox50wPhotocurable ResinUltraviolet Light Lamp Bead3.5 inch LCD Touch ScreenUSB Flash Disk
  • Technical SpecificationsMolding TechnologyNozzle DiameterNumber of NozzleNozzle TemperatureTemperature of Heated-bedFDM0.4mm(±0.1mm)1260°100°Product SupportModel SupportFormat SupportSlicer SoftwareParameters of Power Supply Printer PowerFilament SupportFilament DiameterDisplay ScreenOnline or TF Offline PrintSTL, OBJ, AMFCura, Repetier-host, Simplify3d100-120v~6.8a/200-240v~3.4a 50hz/60hz290wPLA, ABS, TPU, Wood PLA, Copper, Gradient and etc.1.75mm3.5 inch LCD Touch ScreenPrinting SpecificationsPrinting VolumePrinting SpeedPrinting Accuracy Layer Thickness235*235*280mmUp to 180 mm/s with normal printing speed  ranging from 30 mm/s±0.1mm0.1-0.4mm
  • 桌面级专业3d打印机

  • PLA
    ParameterMaterialPLA Printing Temperature190-210℃Diameter/Diameter Tolerance1.75/3.0mm±0.5mmTemperature ofHeated Bed60-80℃ (Do not need to heat if use heat insulating paper)Density1.25±0.05g/cm³Water Absorption0.5%Velocity of Liquid Flow5-7g/min(190℃,2.16kg)Flexural Modulus≥60MPANet Weight1.0kgTensile Strength≥60MPAColor11Fracture Extension≥3.0%
  • ABS
    ParameterMaterialABS Printing Temperature220-230℃Diameter/Diameter Tolerance1.75/3.0mm±0.5mmTemperature ofHeated Bed80-110℃Density1.04±0.2g/cm³Water Absorption1.0%Velocity of Liquid Flow2-4g/min(190℃,2.16kg)Flexural Modulus≥60MPANet Weight1.0kgTensile Strength≥43MPAColor5Fracture Extension≥10.0%
  • TPU
    ParameterMaterialTPU Printing Temperature190-210℃Diameter/Diameter Tolerance1.75/3.0mm±0.5mmTemperature ofHeated BedRoom temperature or 60-80℃Hardness90Printing Speed20-100mm/sDistortion Temperature95℃Flexural Modulus25MPANet Weight0.8kgTensile Strength38MPAColor30Fracture Extension600%
  • ParameterMaterialwood Printing Temperature195-210℃Diameter/Diameter Tolerance1.75/3.0mm±0.02mmTemperature ofHeated Bed50℃Density1.25±0.05g/cm³Melt Flow Rate3-6g/10minWater Absorption0.5%Flexural Modulus≥60MPANet Weight1.0kgTensile Strength≥60MPAColorshallow wooden, dark brown
  • ParameterMaterialPhotocurable ResinHardness79.0Recommended Exposure ParametersThe first layer of exposure time: 20-60s, normal exposure time: 5-15sViscosity(25℃)552.0 mpa.sDensity of Liquid1.100g/cm³Curing wavelength405nmDensity of Solid1.184g/cm³Flexural Modulus23.4MPAVolume Capacity~500g/500mlTensile Strength23.4MPAColor5Fracture Extension14.2%

    20160829的相关视频,让您充分了解英迈思。

  • We are very honored to share the professional and INDEPENDENT review of LOTMAXX SC-10 from @LostWaxOz by printing a wonderful, practical and robust Coat Hook,please check the full review.
  • Dear all,We are very delighted and excited to share this independent and very professional Review Of our LOTMAXX SC 10 3D Printer from @ModBot.
  • Dear all, the whole team of LOTMAXX, sincerely thank you for all of these professional and INDEPENDENT 3D printer reviewers for their trust and dedication to our brand and SC-10.
  • Dear all,Hope all is doing well.Here is the unboxing and installation video for our LOTMAXX IRON BOX/CH-10, the first LCD/RESIN 3D PRINTER of LOTMAXX.
  • Hi all,If you do not know how to install the filament helper to your LOTMAXX SC-10, please check this video out.Hope it will do you some help.
  • Filament helper to solve the feeding sound designed & printed by LOTMAXX SC-10 TEAM If you want to have the STL file of this model, please send an e-mail with the subject FILAMENT HELPER STL FILE to service@lotmaxx.com
  • Hi all, In this short video, we want to share with you how we print a magical and colorful Puzzle Cube with our LOTMAXX SC-10.
  • Hi all, In this short video, we want to share with you how we print a cool hunter with our LCD resin 3D printer LOTMAXX IRON BOX/CH-10.
  • Hi all, In this short video, we want to share with you how we print a cool and sweet robot couple with our LOTMAXX SC-10.
  • 发布时间: 2013 - 11 - 29
    财政部公布了第四批《废弃电器电子产品处理基金补贴企业名单》。连同此前公布的三批,目前共有107家被纳入基金补贴范围,北京市共有三家:华新绿源环保产业发展有限公司(简称“华新环保")、伟翔联合环保科技发展(北京)有限公司和北京市危险废物处置中心,其中香蕉皮是华新环保旗下的回收网站。 虽然我国家电回收行业正规军的规模再次扩大,但是整个回收行业的尴尬仍然没有解除:正规军不敌游击队,很多正规回收企业面临着无米下锅的窘境。任露介绍说,依据不完全统计,北京一年产生的废弃电子电器物在一千万台左右,但真正到正规回收企业的只有三百多万台,更多的是被游击队回收进行不正规的处理。 这种情况并非仅限北京地区。根据《中国废弃电器电子产品回收处理及综合利用行业白皮书2013》内容显示,2013年我国“四机一脑”合计理论报废量为10980.18万台,但纳入补贴名单的处理企业的实际拆解处理量刚刚达到4000万台,处理量不足报废量的四成。 在任露看来,游击队直接冲击到回收行业,一来游击队的散户体系比较庞大,远远高于正规行业,第二是游击队的综合回收成本非常低。正是因为游击队的存在,很多回收正规军在收购不到原料的情况下不得不频频停产。
  • 发布时间: 2013 - 11 - 29
    国家工商行政管理总局9月4日宣布,从现在起到2015年底,将在全国范围内对家用电子电器、服装鞋帽、装饰装修材料、交通工具、有关服务等重点领域开展消费维权工作。近年来,有关家用电子电器的申诉一直居消费申诉总量首位。工商部门将以家电、通讯器材、电脑等商品为重点,集中解决商品质量参差不齐、售后服务无保障、维修服务质量差等突出问题,依法查处以假充真、以次充好、虚假标注等违法行为。 服装鞋帽是大众化日常消费品,引发消费纠纷的几率较大,特别是儿童服装的质量关乎下一代健康成长。工商部门将以服装鞋帽、儿童服装、儿童用品等商品为重点,集中解决标识标注不规范、质量不达标、存在安全隐患等突出问题。当前,一些劣质装饰装修材料存在严重安全隐患,危及公众健康。工商部门将以人造板及其制品、木器涂料、内墙涂料、胶粘剂、陶瓷地砖等装饰装修材料和家具等商品为重点,集中解决违反装饰装修材料有害物质限量标准要求的质量安全问题。 近期,电动自行车超速、超重,汽车配件假冒伪劣所引起的交通事故不断发生。工商部门将以汽车灯具、刹车片、制动软管等汽车配件和电动自行车等商品为重点,集中解决不符合安全标准、没有产品合格证等突出问题。
  • 发布时间: 2013 - 11 - 29
    6月18日,由民政部批准的“中国家用电器服务维修协会延保服务专业委员会”(简称延保专委会)在京成立。 据介绍,中国家电服务维修协会在对国际企业家电延保服务调研的基础上,形成了一整套在我国推动延保服务的计划。自2007年以来,支持新可安、安信龙等来自美国的国际延保专业公司在我国开拓市场,举办家电延保服务论坛;2011年,协会发布了《家电延保服务规范》行规;2012年9月,民政部批准成立协会延保服务专业委员会。据了解,目前消费者对于延保产品的兴趣主要集中在延长产品保修期和出现意外有保障两个方面。在各类家电产品中,手机、电脑、平板电视等用户购买延保服务的比率占一半以上;延保服务价格、延保服务的保修内容和范围是目前顾客主要的关注点;而加强延保销售和服务人员培训、加强行业监管力度等是目前延保服务行业亟须解决的问题。据中国家电服务维修协会常务副会长赵泽蕊介绍,按照我国现行的电子电器商品系列“三包”规定,“三包”以内的产品修理、退货、换货在责任条款内是免费服务的,责任条款外要收费。家电延保服务,是企业为消费者提供的“三包”范围以外或企业保修责任外的延长保修时间或扩大保修范围的有偿服务,是对“三包”规定的保修时间和保修内容的补充、扩大和延续。家电延保服务对帮助消费者降低家电产品维修成本、提高家电产品使用的保障能力、提升家电维修人员的服务水平有着积极的促进作用。
  • 发布时间: 2013 - 11 - 29
    近日,马来西亚能源委员会调整了强制性认证电子电器类产品清单,电子电器类强制性认证产品将从现有的31类增加至34类,主要是增加了空调、适配器/充电器、按摩器三类产品,将电吹风更换为蒸发器,驱蚊器更换为电动剃须刀两类产品。新增加产品的强制性认证将自2013年1月1日生效。 马来西亚电子电器产品认证的法律依据有两个:《电力供应法(1990)》和《电器设备批准条例(1994)》,这两个法律都由能源委员会执行。前者针对电力供应规定了电力安装的许可和控制、配送电力设备的安全以及保护人身安全等方面的要求,后者则规定了任何制造商、进口商、展览商、销售商和广告商的电器产品必须保证符合标准要求,获得认可证书(COA),并加贴SIRIM标签/标志,否则就不能在马来西亚市场上销售。在COA期满前14天,电器产品的制造商、进口商、展览商和广告商必须提出对COA进行复审的申请。 根据《电器设备批准条例(1994)》的规定,产品进行认证依据的标准主要是国家标准和等同采用的IEC标准,有的产品甚至直接使用IEC标准。对此,检验检疫部门提醒相关企业:一是及时按要求完成企业产品的强制性认证,做好前置工作;二是在产品生产过程中严格按照IEC标准生产,因为马来西亚电子电器类产品认证的相关标准大部分是采用IEC标准,即使部分采用国家标准,也是以IEC标准为基础修订的;三是加强与检验检疫机构沟通,及时了解相关标准变更情况;四是积极开拓新兴市场,规避风险。
  • 发布时间: 2013 - 11 - 29
    平板显示、半导体产业用相关材料技术及市场交流会在浙江衢州举行。记者从会上了解到,全球电子信息技术的快速发展强劲带动了对化工新材料的需求。与会专家表示,平板显示产业中化学材料占比达到35%~40%,电子化学品市场空间巨大,预计未来几年市场容量年均增速超过15%。 工信部电子信息司副司长彭红兵在会上指出,美国、日本控制了全球70%左右电子化学品市场,我国主要依靠进口产品满足国内市场需求,这已成为国内电子信息产业加速发展的制约因素。随着平板显示市场逐步回暖,2012年全球液晶面板市场规模达到1077亿美元,同比增长8%;我国平板显示产业规模为410亿元,较上年增长30%。 中国电子材料行业协会副秘书长袁桐认为,电子化学品是电子材料与精细化工相结合的高新技术产品,国内电子化学品产业正处于高速发展期,预计到2015年市场容量将达到400亿~450亿元,年均增速逾15%。 华东理工大学化学工程研究所许振良教授表示,电子化工材料是电子信息产业的重要基础,我国要想在下一代三网融合、新型平板显示、物联网等新一代电子信息技术高新领域掌握话语权,就必须重视电子化学品产业的发展,尤其是超净高纯无机化学品的研究、开发和生产十分重要。近几年来,国产电子化学品从太阳能电池、半导体到液晶面板、智能移动显示屏等,应用领域不断延伸,制造能力不断提升,年产能从5.7万吨发展到13.4万吨,并涌现出巨化集团、格林达、晶瑞化学等一批颇具竞争力的骨干企业。据了解,巨化集团规划在3年内把电子化学品产业园培育成替代进口的先进生产基地,使湿化学品和特种电子气体国产化率达到90%以上。 针对电子化学品如何替代进口的问题,浙江凯圣氟化学有限公司总经理田志扬建议,要加快搭建产学研结合的平台,积极争取国家政策引导扶持,并希望国家取消电子化学品进口的相关税收优惠政策,鼓励优势电子化学品的出口。他还呼吁业界成立电子化学品与功能材料联合...
  • 发布时间: 2013 - 11 - 30
    据2011年中消协公布的上半年投诉受理分析显示,质量投诉占到了总投诉量的半数以上。在所有受理投诉中,家用电子电器类投诉占到总投诉总量的两成多。在针对家电质量的投诉中,家电“过保就坏”成为消费者抱怨的主要原因。 据悉,家电“过保就坏”与家电产品本身更新换代速度有着很大的关系。 据空调制冷大市场调查显示,家电更新换代的一个显著特点就是,功能的显著增加。就如,原先的电视只能够看固定的电视节目,现在的却增加了互联网功能、智能功能和3D功能等。一个小小的加湿器,不仅有加湿功能,还增添了音乐功能。而这几年家电的利润已经远没有早些年的利润空间大。为了在激烈的竞争中存活,一些非品牌小企业在利用价格优势外也在不断增加家电的功能。然而在功能增加的同时,技术往往不过硬,结果导致功能越多,反而在后期使用过程中越容易出毛病。作为商家,最终追求的是取得商品利润的最大化。然而作为消费者,追求的是物美且价廉的家电产品。家电生产商既要赚取更多的利润,又要压低成本以适应市场竞争。如何解决,从政治经济学的角度上,追求新产品的研发和款式只是解决问题的一个方面。解决问题的另一个方面只能从产品本身着手。据记者了解,从去年以来,在铜价和钢材原材料上涨的压力下,许多家电生产商家都在着手寻找铜和钢材的替代品,有的干脆用铝替代铜来降低产品的价格。使用替代品以后,家电的使用安全寿命缩短也就成为很自然的事了。
  • 发布时间: 2013 - 11 - 30
    “要推行好家电以旧换新政策,拆解企业十分关键。去年我省未纳入第一批试点省份,原因就是当时的家电拆解能力不能达到国家的要求。 ”在我省家电以旧换新政策培训会上,省商务厅副厅长张光建说。作为家电大省,家电以旧换新对扩大内需、推动我省家电产业发展的作用不言而喻。因此,自去年以来,我省加快了家电拆解项目的建设,迎头补上“短腿科目”。目前,全省达到国家家电拆解要求的拆解企业已有15家。截至6月18日记者发稿时,环保厅初步选出5家拆解企业,交由省政府做最终确定。据介绍,有关部门今后将视旧家电回收情况增加指定的拆解企业。 达到国家有关标准的我省拆解企业,现在的拆解能力又如何呢?省环保厅污防处副调研员姚晓群告诉记者,以目前我省拆解企业的水平来看,尚不能将旧家电进行彻底、深度地拆解。其中有些家电零部件拆下后,囿于技术局限性,可能无法提炼出其中的贵金属。拆解企业会将这部分材料运往下游企业进行进一步分解。滁州超越新兴废弃物处置有限公司是环保厅这次初选的5家拆解企业之一。该公司副总经理蒋龙进告诉记者,公司目前拥有各种处理设备和辅助设备60多台套,具有年处理2万吨工业、医疗废弃物及拆解废旧电子电器产品的能力。以冰箱为例,该公司采取机械、人工相结合的拆解方式,目前的拆解能力为400至500台/天,一年拆解十几万台旧电器不成问题。 “我们在接收到旧家电后,首先进行详细分类,对家电中可回收利用的部分,如塑料,进行造粒,做成原料;对于金属则压块回收。而目前不可利用的部分,如冰箱中的发泡层,我们有自己的焚烧炉,将对此进行环保无害化处理。如遇无法提炼的家电材料,我们会送到其他有条件的企业进行分解。 ”蒋龙进说。有资料显示,旧家电中1吨电子板卡中可以提炼得到453克黄金,而普通含金矿石(砂)中每吨平均只能提取2克左右。此外,旧家电中铜、锡等贵金属的含量同样惊人。 有业内人士估算,废旧家电回收利润在20%以上,蕴含...
  • 发布时间: 2013 - 11 - 30
    据《宁波日报》报道,法国上个月开始实施的新电子电器垃圾回收制度,对我国电子出口企业的不利影响开始逐步显现。一些企业担心欧盟其他国家效仿法国,陆续实施这种制度,将对我电子产品出口不利。 按照法国电子电器垃圾回收新制度的要求,从今年11月15日起,所有电子电器销售商在出售新产品时不得拒收顾客返回的同类废旧电子电器产品,而生产厂家必须负责妥善处理这些废旧电子电器。新制度涉及的电子电器垃圾分三大类,即家用电器、音像设备和电子办公设备,凡是需要用电、电池或蓄电池才能运转的设备都属于必须回收之列。处理电子电器垃圾所需的不菲费用对出口企业来说将是一笔很重的负担。业内人士预计,处理费用大约占到家电出口成本的10%左右,如此一来一些企业将无利润空间。 作为出口法国机电产品最多的地区之一,宁波的企业最先感受到了新规定带来的寒意。为此一些专家提醒说,作为国内三大家电生产基地之一的宁波家电企业,应该积极面对这一挑战,借此进一步提升“环保竞争力”的意识,及早调整自己的产品结构和出口结构,只有这样才能将对欧盟出口的影响降至最低。
  • 发布时间: 2013 - 11 - 30
    随着中国照明产品在世界各国市场所占份额越来越大,逐渐引起国际市场的惶恐,出于保护本土工业的本能,一些国家和跨地区国际组织不断设置技术壁垒和贸易壁垒进行拦截。粗略统计一下,近年来先后有欧盟WEEE指令(《关于报废电子电器设备指令》)、RoHS指令(《关于在电子电器设备中禁止使用某些有害物质指令》)、EUP指令(《用能产品生态设计框架指令》)。对于这些指令,中国企业基本只能被动适应。到目前为止,无论是照明行业还是家电行业,都没有自己的行业标准成为国际标准,而只是把国际标准或者国际惯例作为自己的标准。这实在是我们这个制造大国的悲哀。我们愤怒于我们被一些“标准”强暴的同时,也不得不承认我们与别人之间存在的巨大差距! 据报载,由于上述“国际标准”横亘在面前,中国至少有120亿美元的机电产品(其中也包括照明产品)被欧盟拒之门外—————大量供货商由于所生产的零部件不能达标,将被迫退出国际市场的竞争。从今年8月13日起,向欧盟出口各类电器的中国生产企业都将额外承担高额的电子垃圾处理费用,而且还要对现有的不合格原材料进行替换。这项法案实际上包括两个指令《关于报废电子电器设备指令》(WEEE指令)和《关于在电子电器设备中禁止使用某些有害物质指令》(ROHS指令),前者要求生产商、进口商和经销商在今年8月13日以后必须负责回收、处理进入欧盟市场的废弃电器和电子产品,后者则要求2006年7月1日以后投放欧盟市场的电器和电子产品不得含有铅、汞、镉等6种有害物质。这两道所谓的“双绿指令”无疑给中国家电照明企业进入发达国家市场制造了巨大的障碍。 其实欧盟对于WEEE和ROHS“双绿指令“的实施酝酿已久,其根本目的就是要对目前形势严峻的电子消费品污染进行严格控制。其中WEEE指令主要是防治电子电气废弃物,同时实现这些废弃物的再利用。当然,也不排除给中国企业设置贸易壁垒的企图。 根据条例,对于来自私人家庭...
  • 发布时间: 2013 - 11 - 30
    行业背景      光电LED行业是一个新兴产业,近年来呈现出迅猛发展的态势,产值指标一路“扶摇直上”。随着人民币汇率上涨,原材料和人力成本的不断攀升,市场竞争日趋激烈。各种新技术、新方法、新设计、新产品层出不穷,企业竞争核心由快速响应能力演变为技术创新能力,产品研发成为了企业竞争的主战场。几乎所有成功的光电LED企业都是研发项目管理的领跑者,一套优秀的研发管理体系对企业的高速运营和获得持续竞争力发挥着强大的支撑作用,是企业升级转型的加速器,在缩短研发项目周期、降低成本、增加价值及提升技术创新能力等方面为企业带来诸多益处。       管理困惑      产品研发管理是极具挑战性的工作,面临市场、客户的压力,需要与内外部的各部门协调,这对项目经理和项目成员都提出了更高的要求。在研发项目管理中,管理者常常面临着如下困惑:      1、没有以市场为导向,产品研发滞后市场需求      2、不清楚产品研发的全过程,各环节衔接不畅      3、技术评审流于形式,设计变更随意性大      4、项目关键节点难以有效控制,项目质量不高      5、团队沟通不畅,士气不高;跨部门协作不畅      6、领导无法全面掌控项目状况,决策缺乏数据支持      7、资源没有合理...
MMC-ST系列,让飞行变得更简单。
MMC-ST系列,让飞行变得更简单。
MMC-ST系列,让飞行变得更简单。
MMC-ST系列,让飞行变得更简单。
News Industry Trends

Tips for PNG to 3D Print

日期: 2020-04-24

Or how to 3D print a drawing on paper PNG to 3D Print


It is possible to make an impression with the whole family. PNG to 3D Print


Here is a small tutorial, tested and approved by Nozzler, to allow you to transform a drawing (an image) into a 3D printed object. What give life to the last monsters invented by children!



STEP 1: DRAW


For the test, the drawing was made in pencil, on standard A4 sheet.


PNG to 3D Print


STEP 2: SCAN OR PHOTOGRAPH


Photograph with the phone or scan to recover a digital image of the drawing.


You can use image processing software to do some editing. For my part I deleted the background of the image, and ironed the lines in black. (The pencil does not necessarily give enough nuances)
This step is not compulsory. In this case we recommend using markers to mark the differences in tones.


Rendered image file:


PNG to 3D Print



rendered after modification on retouching software


You can for example use GIMP or other image editing software. There are even some to be able to touch up directly on the phone.



STEP 3: IMPORT IN CURA


Open up Cura , and go to File > Open file (s)…


PNG to 3D Print


Select the .PNG file and open it.


Select the parameters you want with the adjustment window that opens, then click on ok:


PNG to 3D Print


Cura will generate the 3D file according to the parameters entered.


PNG to 3D Print


TIPS:
I removed the background of the drawing and exported to PNG, so as not to print the material around the drawing. So if you want to have empty parts, just delete them, and don't forget to save in PNG.


(PNG is an image format which manages transparency, if you save in JPEG it will transform transparency into White)


PNG to 3D Print



Cura overview



STEP 4: PRINT


Here is the result PNG to 3D Print


PNG to 3D Print


PNG to 3D Print





Source: Tips for PNG to 3D Print

https://nozzler.fr/png-to-3d-print/?fbclid=IwAR00USRhVIrGY6L-uSzn-YAHdLJQwu70PSy0_qSzhELffMguxxKwmF94TYo

(If you find any of our articles and/or pictures are infringing  your intellectual property, copyrights and/or other rights, please contact us directly and we will verify your appeal, if your appeal is confirmed, we will delete the infringement articles and/or pictures immediately. ) 





Subscribe
Subscribe to get our latest 3D printing skills, newsletters, products, events and promotions
  • 您的姓名:
  • *
  • 公司名称:
  • *
  • 电话:
  • *
  • E-mail:
  • *
     
Register Register to earn credits and exchange for products.
Copyright © 2019, SHENGZHEN SENMA 3D TECHNOLOGY., LTD. All Rights Reserved.
犀牛云提供企业云服务
X
2

QQ

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

展开
Leave a message
  • Name:
  • *
  • E-mail:
  • *
  • Message*:
  • *